The tanks

Consists of 4 layers unless it’s mentioned otherwise

Polyethylene consists of high density due to electronic injection and is available in several sizes, as small sizes contain 3 plastic layers to a thousand liters and large sizes have 4 plastic layers above a thousand liters, and the production of low-density polyethylene is characterized by the availability of a foam layer.

Polyethylene consists of high density due to electronic injection and is available in several sizes, as small sizes contain 3 plastic layers to a thousand liters and large sizes have 4 plastic layers above a thousand liters, and the production of low-density polyethylene is characterized by the availability of a foam layer.

No. In the case of small and medium vehicles

Yes. It is used to store petroleum, chemical, sewage and fresh water materials with applicable requirements.

Putting a water pump or plunger inside the tank to bring water up to the home grid.

The polyethylene tank is available in two types “horizontal and vertical” and consists of several colors

The best types of raw materials (SABIC) are used, which are approved for water storage by the Saudi Standards and Metrology Authority and the Food and Drug General Authority.

Yeah. Delivery is available anywhere in the Kingdom

yes. Capacity, durability, high endurance and withstand tough conditions and weather factors

yes. The ability to customize and add accessories on demand, such as ladder, slots, covers and increases

Yes, it is approved by the Civil Defense

Yes, this can be this, and the alternative is to use special jackets up to a height of 5 m. or by using flat floors of lining to a maximum height of 2m

The tank cannot be buried – it can be implemented in basement floors and difficult and narrow places that cannot be connected to regular tanks.

Yes, we have 3 layer insulated tanks and the insulation thickness is 20mm and 50mm

Panel tanks are implemented in any shape other than circular. Rectangular – square – corner – empty in the middle for columns – or columns inside the tank if it is in the basement or in a gradual or U-shape or the alternative is the circular GLS tank.

Yes, and the tank is supported from the outside only, but the height does not exceed 3m only.

It is not possible. Panel tanks are used – for drinking water – sewage – treated water – saline water up to 5000 TDC

10years and the duration can be increased according to the project

Delivery takes place within 6-7 working days.

Prices are determined according to the design on a special program and the price offer is sent to you within one day only or less. Example: – the volume of the tank, let it be 100 cubic m, and it has more than one price, depending on the dimensions, length, width and height Although the size is the same

Polyurea

Yes, there are many colors of polyurea according to the client’s need for large projects, the official color is gray with dark and light shades

Yes, with a percentage of up to 40 to 60% of the estimated timeline for insulation materials, where the rate of technical implementation of polyurea spray per hour is an average of 120 m. Also, two stages can be combined at the same time, such as spraying polyurea and implementing the top coat directly during implementation

Yes, but compared to the quality of the insulation, the long warranty periods, and the effective solutions that guarantee access and coverage to all parts of the surface to be isolated, all of this is not comparable to its price

No. Compared to the ability of polyurea to treat from above tiles, the implementation of the polyurea clause is cheap for the following reasons

There are several items that will be provided to the customer

1-Item of removal, crushing and deportation

2- item surface treatment

3- item waterproofing installation

4- item installation of thermal insulation

5- Item covering the insulation system with tiles or gravel

Yes, the polyurea guarantee periods reach 25 years, so the surface must be prepared and treated in the following ways

 

Mechanical treatment: such as grating and sandblasting or sanding

Chemical treatment: such as using chemicals to remove oil and rust stains

Slope treatment: such as using foam concrete to treat surface tendencies on drainage systems, the price varies from one surface to another according to the system and the required treatments

Polyurea gives a thickness of 1.5: 2 mm with a 25-year guarantee, and a 50-year guarantee is twice the aforementioned thickness

Yes, there is 100% pure – semi-pure – and hybrid or hybrid -but the company uses pure polyurea only

Yes, it is applied safely inside drinking water tanks, and it is implemented in two layers (primer + polyurea), but it needs to be plastered from the inside to reduce consumption

Italian Trend Pump

The outer body is protected from dust and rain, and the price is affordable

For fear of excessive pressure, which could lead to the explosion of the network pipes if they are old or have any problem

The pumps are designed to withdraw from the tanks, so that the intake line is not far from 4 meters, as a maximum

When installing the pump, it must be taken into account to reduce the plumbing connections in the intake line, as this leads to damage to parts inside the pump due to the excessive effort being removed to withdraw water

American Myers Pump

 The water flow rate of the American-designed pumps is greater than it fills the tank quickly, and thus the pump works for a short period of time. The American-designed pumps are also characterized by a long life span

This leads to damage to parts inside the pump

The maximum total suction line is 4 meters, and the closer the pump is to the water source, the better

Yes, all spare parts are available and the pump repair takes a short time

American Myers pumps are available 1 phase 220 volts

Italian trend diver

Yes, the diver must be raised from the bottom of the tank by at least 10 cm so that the diver does not pull the sediments at the bottom of the tank

The electric buoy prevents dry operation, as dry operation will damage the diver

Household submersibles are designed to be installed inside tanks only to draw clean water free from sand and gravel

The company has the following capacities: 1 HP, 1.5 HP and 2 HP

Pressure and control systems

It is not possible, as this will lead to the combustion of the electronic board of the pressure device, as the nominal pump ampere should not exceed the ampere of the pressure device (10 amperes), and therefore it is recommended to install a maximum pump of 1 horsepower

It can be installed on the upper tank or the ground tank, where it is installed on the upper tank to strengthen the network pressure, and it can also be installed on the ground tank in the absence of an upper tank and thus works to feed from the ground tank of the network directly

It is recommended to cover the pressure devices from sunlight

Tank Desalination Device 7 Stages 75g Membrane American

The candles are consumables and are changed periodically and their cost is simple and borne by the customer

The internal candle of the device are damaged due to the failure of the timer device, and the connection of the time that is turned on the desalination device and the tank from the water and the disconnection of the power supply to it

It is not suitable to install the device on water whose salt exceeds 900

Yes, the 7-stage analyzer can be connected to the refrigerator, provided  that a bottle equipped with a float and screw connections is purchased. It is also available in the company and can  be requested during the purchase of the desalination device

It gives a productivity of 290 liters per day, which is equivalent to approximately 14 bottles per day.

Tank water filter 3 stages

The three-stage filter has nothing to do with desalination, but rather works to filter and purify water from impurities, pipe rust, chlorine, organic materials and unpleasant odors

Yes, the three-stage tank filter comes with a set of faucet connections for self-installation and does not require an installation specialist.

Gives a productivity of 500 liters per day

Yes, to ensure the removal of rusting pipes, tank deposits, and unpleasant odor

Economical pack 4 filter candles

It does not have a certain shelf life, as it must be covered with a transparent plastic wrap to protect it from weather changes, and the storage place should be well ventilated

No, and the filter candle must be changed at regular intervals for each stage

Of course, this aims to reduce the cost to the client and is sufficient for a period of 6 months

Filter Candles

It does not have a certain shelf life, as it must be  covered with a transparent plastic wrap to protect it from weather changes, and the storage place should be well ventilated

No, and the filter plugs must be changed at regular intervals for each stage

Value Pack 7 filter cartridges

It does not have a certain shelf life, as it must be  covered with a transparent plastic wrap to protect it from weather changes, and the storage place should be well ventilated

Of course, this aims to reduce the cost to the customer and is sufficient for a full year

No, and the filter candle must be changed at regular intervals for each stage

Yes, to ensure the removal of rusting pipes, tank deposits, and unpleasant odor